The Flash-e-Vapor e is a fiber evaporator, which must be wound by yourself.
The evaporator consists of stainless steel and is completely manufactured and assembled in Germany. In the development of the Flash-e-Vapor to its functionality greatest emphasis has been placed on the handling. Its design is characterized by functional grip aids, such as knurling and grooves. The tank is to be filled without the use of tools and without special bottles or needles . Because the Flash-e-Vapor generates an unusually good flash by its own design we recommend using Liquids with a moderate nicotine content.
The tank has a capacity of 3 ml The base has a 510 connection.
All parts of the Flash-e-Vapor are cleaned before delivery.
Thats how the Flash-E-Vapor is cleaned:
All parts of the tank and the chamber can go into the ultrasonic bath.
The socket is tightly scewed but should not be cleaned in the ultrasonic bath to keep the denseness. You can clean the socket with a tootbrush and dish soap under warm water.
The first steps :
Once you receive your Flash-e-Vapor, disassemble it. Since it has been cleaned the O-rings may be a bit dull. Grease all the O-rings.
As the O-rings are highly acid-resistant you can moisten them with a little liquid.